Return to Model 92B+ Schematic List

Review the figure and make your selection of parts from the list below.

Parts might not be listed due to no or limited availability.
To determine availability of unlisted parts, call (636) 544-5738

Fig.	Item #	SKU/Part #	Part Name	Quantity Required*
F	1	VM2000	Carburetor assembly VM20	1
F	1+	VM2000KIT	Carburetor - Mikuni carburetor rebuild kit #13406A	1
F	2	VM2002	Mixing chamber body	1
F	3	VM2003	Mixing chamber cap	1
F	4	VM2004	Mixing chamber top	1
F	5	VM2005	Throttle cable adjuster	1
F	6	VM2006	Throttle cable lock nut	1
F	7	VM20072.0	Throttle valve 2.0	1
F	8	VM2008	Throttle valve spring	1
F	9	VM2009	Throttle adjuster	1
F	10	VM2010	Throttle adjuster spring	1
F	11	VM2011	Throttle bar	1
F	12	VM2012	Throttle bar cotter pin	1
F	13	VM20134F6	Jet needle 4F6	1
F	14	VM2014	Jet needle clip	1
F	15	VM2015	Jet needle spring seat	1
F	16	VM2016	Mixing chamber top rubber cover	1
F	17	VM2017	Pilot air screw	1
F	18	VM2018	Pilot air screw spring	1
F	19	VM2095	Main jet #95 (std)	1
F	20	VM20100	Main jet #100 (rich)	1
F	21	VM2090	Main jet #90 (lean)	1
F	22	VM2020	Main jet washer	1
F	23	VM2021	Valve and seat	1
F	24	VM2033N6	Needle jet (N-6)	1
F	25	VM203425	Pilot jet (#25)	1
F	26	VM2023	Float valve seat gasket	1
F	27	VM2024	Float	1
F	28	VM2025	Float arm pin	1
F	29	VM2026	Float chamber body	1
F	30	VM2027	Float chamber gasket	1
F	31	VM2028	Float chamber setting screw	4
F	32	VM2030	Starter plunger unit	1
F	33	VM2031	Starter lever	1
F	34	VM2032	Carburetor O ring	1
F	35	903503	Vent pipe	1
F	36	923504	Inlet manifold	1
F	37	903505	Cylinder inlet manifold gasket	1
F	38	(63)06015	Inlet manifold spring washer	2
F	39	(51)0605	Inlet manifold nut	2
F	40	903506	Inlet stud bolt	2
F	41	903502	Inlet gasket	1
F	42	903501	Heat block	1
F	43	(63)06015	Carburetor spring washer	2
F	44	(51)0605	Carburetor nut	2
F	45	VM2035	Starter lever spring	1
RETURN TO TOP
* Quantity Required is the quantity of the specific part needed for this figure. It does not imply a minimum purchase.