Return to Model 61 Schematic
Review the figure and make your selection of parts from the list below.

Parts might not be listed due to no or limited availability.
To determine availability of unlisted parts, call (636) 544-5738
Fig. | Item # | SKU/Part # | Part Name | | |
M | 1 | 618600 | Frame | 1 |  |
M | 2 | 618605 | Spark arrestor bracket | 1 |  |
M | 3 | 718610 | Steering head race (top) | 1 |  |
M | 4 | 718611 | Steering head race (bottom) | 1 |  |
M | 5 | 718614 | Steering head inside nut | 1 |  |
M | 6 | 908617 | Steering head washer | 1 |  |
M | 7 | 718615 | Steering head bearing race (top) | 1 |  |
M | 8 | 718616 | Steering head bearing race (bottom) | 1 |  |
M | 9 | 718617 | Steering head cap | 1 |  |
M | 10 | 718618 | Steering head ball (1/4") | 40 |  |
M | 11 | 908620 | Grease nipple ( 1/8") | 1 |  |
M | 14 | 618630 | Fender rear | 1 |  |
M | 15 | 618646 | Fender rear / suporting plate | 1 |  |
M | 16 | 948637 | Rubber mount | 1 |  |
M | 17 | 618636 | Bolt (special) | 2 |  |
M | 18 | 948638 | Special washer | 1 |  |
M | 19 | (10)0620 | Bolt | 2 |  |
M | 20 | 978639 | Washer (special) | 2 |  |
M | 21 | (62)0601 | Washer | 4 |  |
M | 22 | (10)0618 | Bolt | 1 |  |
M | 23 | (63)06015 | Spring washer | 5 |  |
M | 24 | (51)0605 | Nut | 5 |  |
M | 25 | 618631 | Fender rear / mud apron | 1 |  |
M | 26 | 998655 | Skid plate (black) | 1 |  |
M | 27 | (10)0818 | Bolt | 4 |  |
M | 28 | (62)08016 | Washer | 4 |  |
M | 29 | (63)0802 | Spring washer | 4 |  |
M | 30 | 718608 | Bolt (M10-172) | 2 |  |
M | 31 | 618608 | Bolt (M 10-146) | 1 |  |
M | 32 | 618609 | Bolt (M 10-280) | 1 |  |
M | 33 | 71860481 | Nut (M10 - P1.25 Special) | 4 |  |
M | 34 | (62)10016 | Washer | 9 |  |
M | 35 | (63)10025 | Spring washer | 4 |  |
M | 36 | 618606 | Collar | 3 |  |
M | 37 | 618648 | Swing arm protector rubber | 1 |  |
M | 38 | 708622 | Bolt (M10 - P 1.25) | 2 |  |
M | 39 | (65)10009 | Tooth washer | 2 |  |
M | 40 | 61865301 | Swing arm shaft stopper (right) | 1 |  |
M | 41 | 61865302 | Swing arm shaft stopper (L) | 1 |  |
|
* Quantity Required is the quantity of the specific part needed for this figure.
It does not imply a minimum purchase.