Return to Model 3 Schematic List
Review the figure and make your selection of parts from the list below.
Parts might not be listed due to no or limited availability.
To determine availability of unlisted parts, call (636) 544-5738
Fig. | Item # | SKU/Part # | Part Name | | |
C | 1 | 34500 | Main shaft | 1 | |
C | 2 | 34510 | Main shaft inner race | 1 | |
C | 3 | 994521 | Idle gear collar | 1 | |
C | 4 | 994722 | Kick idle gear 15T | 1 | |
C | 5 | 994723 | Kick drive gear 59T | 1 | |
C | 6 | 34511 | Thrust washer | 1 | |
C | 7 | 944502 | Primary gear (55T, helical) | 1 | |
C | 8 | (62)12023 | Washer | 1 | |
C | 9 | (63)12024 | Spring washer | 1 | |
C | 10 | 904503 | Main shaft nut (M12) | 1 | |
C | 11 | 34601 | Counter shaft | 1 | |
C | 12 | 904608 | Counter shaft ball (5/16") | 20 | |
C | 13 | 34602 | Counter 1st gear 30T | 1 | |
C | 14 | 34603 | Counter 2nd gear 28T | 1 | |
C | 15 | 34604 | Counter third gear 25T | 1 | |
C | 16 | 34605 | Counter 4th gear 22T | 1 | |
C | 17 | 34606 | Counter 5th gear 20T | 1 | |
C | 18 | 994724 | Kick idle gear 25T | 1 | |
C | 19 | 914607R | Counter shaft spacer (right) | 1 | |
C | 20 | 914608R | Counter shaft spacer (left) | 1 | |
C | 21 | 904621 | Counter shaft O ring | 1 | |
C | 22 | 984613 | Control shaft | 1 | |
C | 23 | 904616 | Control shaft spring (L) | 1 | |
C | 24 | 904617 | Control shaft spring (R) | 1 | |
C | 25 | 34615 | Ball receiver | 1 | |
C | 26 | 984619 | Control shaft spring stopper | 1 | |
C | 27 | 984620 | Control shaft snap ring | 1 | |
C | 28 | 924609 | Sprocket collar | 1 | |
C | 29 | 944635 | Sprocket 15T (#428) | 1 | |
C | 29 | 944633 | Sprocket 13T (#428) | 1 | |
C | 29 | 944634 | Sprocket 14T (#428) | 1 | |
C | 29 | 944636 | Sprocket 16T(#428) | 1 | |
C | 30 | 984611 | Sprocket lock washer | 1 | |
C | 31 | 924612 | Sprocket locknut (M20) | 1 | |
C | 32 | 994711 | Kick shaft | 1 | |
C | 33 | 994702 | Kick gear 32T | 1 | |
C | 34 | 901507 | Kick roller (8 - 12) | 5 | |
C | 35 | 994714 | Kick roller retainer | 1 | |
C | 36 | 904715 | Kick roller retainer hold snap | 1 | |
C | 37 | 994721 | Kick gear collar | 1 | |
C | 38 | 90471802 | Kick gear thrust washer t=0.2mm | 1 | |
C | 38 | 90471803 | Kick gear thrust washer t=0.3mm | 1 | |
C | 38 | 90471805 | Kick gear thrust washer t=0.5mm | 1 | |
C | 39 | 31005 | Kick shaft oil seal | 1 | |
C | 40 | 904716 | Kick spring | 1 | |
C | 41 | 904717 | Kick spring cover | 1 | |
C | 42 | 34700 | Kick crank assembly | 1 | |
C | 43 | (12)0620 | Bolt | 1 | |
C | 44 | 993703 | Oil pump drive gear | 1 | |
C | 45 | 993704 | Gear cover | 1 | |
C | 46 | (42)0515 | Screw | 3 | |
C | 47 | (63)05013 | Spring washer | 3 | |
C | 48 | 993705 | Oil pump idle gear | 1 | |
C | 49 | 993706 | Idle gear set bolt (M6) | 1 | |
C | 50 | 33700 | Oil pump assembly (2M-44W) | 1 | |
C | 51 | 993701 | Cable terminal | 1 | |
C | 52 | 993713 | Check valve | 2 | |
C | 53 | 993721 | Banjo bolt | 2 | |
C | 54 | 993707 | Washer (special) | 5 | |
C | 55 | 993702 | Oil pump gasket | 1 | |
C | 56 | (42)0518 | Screw | 1 | |
C | 57 | (42)0530 | Screw | 1 | |
C | 58 | (63)05013 | Spring washer | 2 | |
C | 59 | 33709 | Oil line (inlet) | 1 | |
C | 60 | 33714 | Oil line (outlet) | 2 | |
C | 61 | 33711 | Grommet | 2 | |
C | 62 | 993715 | Oil line clip | 6 | |
|
* Quantity Required is the quantity of the specific part needed for this figure.
It does not imply a minimum purchase. |
